Showing posts with label Star Wars. Show all posts
Showing posts with label Star Wars. Show all posts

Sunday, July 19, 2015

Chess Jawa - Medium

 My younger son combines his love for Star Wars with his true passion, chess, by cosplaying as the Chess Jawa.  (Look for him in front of the Marriott Starbucks during DragonCon!)  For his birthday, I made a Chess Jawa cake!

This cake is pretty easy if you have worked with rolled fondant.  Here are the instructions.

The day before the party, I baked a cake in the Wilton Stand-up Bear cake pan.  I followed the directions, using a regular pudding-in-the mix yellow cake mix and a pound cake mix, together.  The resulting cake was very nice both taste and texture.  One caveat - the directions say bake in the center oven rack, but the cake was too tall.  Use the lowest rack.  Also, the directions say 2/3 cup batter in the core, but only use 1/2 cup.  Mine baked up to the broiler element! 

If you want to include a chess board, make the chess pieces the night before too.  Because our party was close to July 4, I used red and blue fondant to make the pieces.  (Just shape the chess pieces by hand, as it if were play-doh!)

The next morning, I mixed a batch of buttercream icing (see recipe in the side menu), frosted and inserted the cake core, then trimmed the bottom of the cake so that it sat flat on the cake board.   I cut off the bear's ears and feet, then covered the entire cake in a layer of the icing.  Set it aside for an hour or so to really set the icing.  I used this time to make a pan of rice krispy treats for the chess board.

I rolled black and white fondant into sheets and cut out 32 squares of each color, sized to fit my chess pieces.  I turned the rice krispy treat upside down, so that The flat bottom was on top.  Starting with one corner of the rice krispy treat, I layered the chess pieces to make a traditional 64 square board.  I used a large knife to trim the rice krispies from the edges, then cut those into squares for folks to eat. 

Greg prepared 2 small orange LEDs for me, attaching them to button batteries and covering the batterse and wire with tape. The LEDs really make this cake pop!  I rolled a small bit of black fondant into an oval for the face.  Greg pushed the LEDs through the fondant.  The batteries stuck into the fondant on the back side. 

I covered the Jawa with a layer of Satin Ice dark chocolate fondant.  For this cake, use a high quality chocolate fondant - you can order online if you don't have a local source.  I used a little more than 1/2 of a 2 lb. tub.   Knead the fondant quite a bit - you want it smooth, pliant and glossy. 

I rolled about 1 lbs of well-kneaded fondant into a roughly triangular shape.  Using your rolling pin, position the fondant over the cake, so that the top of the triangle is above the head.  The "arms" of the triangle wrap around the cake, to form the robes.  

Greg helped hold the hood part of the fondant open while I got the bottom together.  I smoothed the seam where the edges overlapped and used my fingers to emphasis the arm of the cake bear underneath.   (I made the fondant reflect the shape of the bear.) 

Then, while Greg was holding the hood open, I slid the face (with the LEDs) in place, and arranged the hood piece around.  I tucked a little bit of trimmed rice krispy candy on top of the head to help hold the hood up, then trimmed the fondant on the sides of the hood to remove excess.

The face was a little short, so I rolled a bit of the trimmed chocolate and added this aound the chin.  I also used some of the trimmed bits to create sleeves and the bandolier.  For the arms, I made 2 small balls of rice krispy candy, covered them with black fondant, then inserted them into "sleeves" (really just a ring of chocolate fondant).  I pulled the ends of the rings and used 1/2 a thin bamboo skewer to attach them to the cake. 

I also rolled a long thin strip of chocolate fondant for the bandolier and finished that with little black fondant pockets. 

I finished Jawa by adding some "fraying" texture on the edges of the robes.  If you have a fondant toolset, use the shell tool.  If not, use the tines of a fork.  

Since it was a birthday cake, the Jawa is holding 3 sparkler candles! 




Saturday, July 11, 2015

Separatist's War Council Meeting - Medium

For my oldest son's birthday, we decided to recreate the scene in Ep. 2 where the Separatist Council meets in the war room on Geonosis.  The scene was not all that hard to create, BUT it's big.  Really big.  This is one for a crowd!


First, I rounded up Hasbro figures of all the war council members.  A few extra Geonosians are good.  (I found most of the figures used on eBay and only paid a couple of dollars for them. The figures were a birthday gift for my son too - added to his collection.) 

To get the needed height, we started with Styrofoam rings from the craft store.  We stacked 2 rings then covered with red duct tape.  The Styrofoam also serves as a base upon which we built the walls.   We added dowels to give the walls extra support.  These also held up a wire ring (also from the craft store) that is used for finishing.  Note that we did cut a "door" in the ring.  There is a door way in the scene, and we used that little bit of Styrofoam to hold up the Geonosian in the air.

The walls are my favorite large-scale building material: Rice Krispy Treats.  I made 4 large (10x14") pans of treats - each containing a double batch of mix.  (Use the recipe on the back of the Rice Krispy cereal box.)  Let these set overnight to get completely firm, then run bamboo skewers through them and mount them upright on the Styrofoam base as shown.  Curve them carefully to create the room.   To be safe, I added a backing of heavy paper, and we looped some string around the dowels. 




The war room is covered in a rich reddish tapestry.  I used Froot-by-the-Foot, the red/blue tie dye flavor.  I believe 1 had 12 boxes.  (This comes in boxes with other colors - I used a few of the yellow/orange ones for the wall hangings, but honestly we had a lot left over that we didn't use.  I gave them to kids at the party.)  To make these, cut lengths of the ribbon that fit the height of your walls. Lay them slightly overlapping on a cutting board, then dipping a finger in a bit of water, moisten the edges. Use a rolling pin to press and seal them into a sheet.  Affix the sheet to the walls with toothpicks.  This is hard at first, but you pretty quickly get the hang of it! 



We added some LED lights around the base for fun.  


The holographic war table was the "cake" part of this scene.  My son likes snickerdoodles best of all, so I made 3 giant cookie-cakes using the Wilton 9" cookie cake pan.  (You can use my recipe or else 2 tubes of refrigerated cookie dough.  Sugar cookie and chocolate chip doughs work well.)  The table top was one of the cookies.  I trimmed the other 2 cookies into 6" rounds and used those for the base of the table.  (Use a 6" cake round as a template for trimming.  We just ate the leftover bits.)

 

The whole cookie cake served as the table top.  I turned it upside down, so the flat surface was on the top and placed an 8" cake round under the it so it could sit on top of the stacked 6" cookie bases.  You can see it here, after I pulled it off the base to serve.  
 

With the 9" cookie upside down on the base, I rolled white fondant and cut a circle using the cookie plan as a template.  I let this harden for a couple of minutes, then placed it on top of the cookie.  I then rolled red fondant and cut a 6" circle to go on top, as pictured.  I added the holographic details by gently warming and trimming gummy bears.  The large elements are 3 Swedish Fish, warmed and smushed together, with a toothpick to hold them up.  I had some pearl luster dust that I rubbed around the white edge to give it some shimmer. 



I finished the scene by positioning the Hasbro figures.  I hot glued one of the Geonosians to a clear plastic floral pick so he could fly over the scene.  The pick is inserted into a pit of leftover Styrofoam that we taped to the bottom of the scene to support him. 


Lastly, I covered the back of the scene with a bit of red fabric that I had left over.  It gave the war room a finished look from behind! 

Holly Jolly Sarlac - Easy

Several people shared Yummy Crumble's AMAZING Star Wars Sarlac Bundt Cake with me last fall.  http://yummycrumble.com/star-wars-sarlacc-bundt-cake/ 

Such a great idea!  I decided to do a holiday version for some of our friends - hence the Holly Jolly Sarlac!



I just made a standard bundt cake using a box mix.  I also made a batch of snickerdoodles (see my recipes) and shaped the sarlac bits our of dough.  (I made the "tentacles" kind of big, so that they would be good to eat as cookies.)  

Ymmy Crumble has teeth in the sarlac's mouth, but that's not canon.  To be more accurate, I used almond slivers around the cake's center hole.  I covered the whole cake in crushed Biscoff cookies, then added a little fondant santa hat, red nose and candy cane!  Happy Holiday!  

Monday, November 11, 2013

Star Wars Mos Eisley Cantina (Medium)

We decided to recreate Chalmun's Cantina.  This project was fairly easy in terms of the skill required, but challenging due to the scale.  We wanted the Cantina to be appropriately sized for Hasbro figures.  So it's big!

I started by rounding up all of the Hasbro characters that I could find - the boys had some, I found some on eBay, and borrowed the rest. Some of the Hallmark Christmas ornaments also work - I have the Celebration set with Obi-Wan, Ponda Baba, and Baba's severed arm... (how perfect is that!)

I found good floor plan diagrams of the cantina online, and removed most of the interior walls.  I did have "niches" for the band, and (of course) Han and Greedo.  Keeping the curved wall with the dome was also important.  I planned where I would put the figures I had, based on the scene from the movie.

I laid out the floor plan 2 days before the party.   I started with a 33"x33" cake board.  We covered it with a piece of tan plastic tablecloth, then created a foundation for the walls using a 2" strip of stryofoam covered with tan masking tape.   (This added height and also provided a place for skewers to stabilize the walls.) 

I knew I needed approx. 7" for the band, so I scaled the rest from there.  The entire structure is approx. 32"x32", with the bar set 11" in from each side.  (the center of the bar is in the middle of the back part of the structure.  The bar is approx 14" long.  The bar top is 2" deep, with 2" between the bar top and the center island.  The island is also 2" in deep.  This scale worked well with the figures. 

The day before the party, I made rice crispy treats for the walls.  At some point I lost count, but I think I made 9 pans (9x13) - yes 9 - of rice crispy treats.  One batch made the dome.  (Molded that in half of the ever-so-useful Wilton sports ball pan!)  The rest were simply cut into 2" strips and piled on the foundation.  My target wall height was 6", with the dome on top.  The rice crispy strips curved very easily to make the rounded wall.  Be sure to spray the pans liberally with non-stick spray!  For planning, I started around 3 pm and finished around 7:30 or so.

Notice the "gap" in the wall - that's where a snickerdoodle wall gets inserted.



When I was done with the rice crispy treats, I made the dough for the snickerdoodles.  I made a double-batch of dough (see recipes side link) - this was more than I needed, but I wanted to freeze some dough for Christmas baking next month.  I "rolled" the dough into square-shaped logs that we 2" thick, so that I could slice-and-bake the bar structure the next morning.

The morning of the party, I got up early and baked cookies.  I sliced cookies to stack as the bar and for the final bit of wall (the wall behind the bar).  Before I baked the cookies, I used a Wilton large round tip (#12) to cut a hole in the center of each cookie.  This enabled me to stack them on bamboo skewers which I stuck in the foam.  It turned out that I didn't need skewers for bar itself, as it was only 3 cookies tall, but I did use skewers for the exterior wall.  Bake some cookies without holes for the top.  I rolled some additional dough out for the walls, table tops and bar tops.

Once it was all together, I added the Hasbro figures.  I finished up by using some fondant to make the vessels on the bar island and the cups for the figures.  (For the cups, just shape a small tube, then use a skewer to make the hole.) 







Before we served this, we dropped a little MP3 player and tiny speaker in the area under the dome, playing the Cantina band music clip!  I also added a tiny cup with a bit of dry ice and hot water behind the bar to give a smoky effect.  Very fun! 

Here are some shots of the interior:






To serve, just cut apart the walls!  Enjoy!

Monday, September 17, 2012

Jawa Cupcakes - Easy

Blogger JustJenn has some amazing Star Wars baking and party ideas!  (http://justjennrecipes.com/category/star-wars/)  All her stuff is very cool, but best of are all the Jawa cupcakes!  (I don't know how many people sent me the link to these! We do love Jawas!)   I decided to recreate the cupcakes for Dragon*Con 2012, and wanted to share my photos and recipes.

First, cute as her cookies were, Jenn's vegan chocolate cookie recipe didn't work for me.  The dough was way too crumbly; I could not get it to roll properly and it didn't taste right.  If you need a vegan recipe, do some searching online.  But  if you can use a recipe with real butter, that's definitely the way to go.  My rolled sugar recipe is posted in the Cookie and Frosting Recipe page linked to the side bar. I used this, but you can use your favorite rolled cookie recipe, any flavor.

I started by making my standard rolled snickerdoodle cookies, adding a fair bit of brown food coloring to the batter.  I put the dough in the fridge to chill overnight.  (Note - Jenn's cookies are much darker brown, which I like. Using a dark chocolate cookie dough is ideal for color. My kids love snickerdoodles best of all, however, so I didn't do a chocolate cookie.  The price: my Jawas' robes are a bit too light.)


In the morning, I used a box mix chocolate cake (Devil's Food) to make 2 dozen cupcakes.  Make the cupcakes kind of small - you want to minimize the crown as much as possible.  Jawa's like flat-topped cupcakes!  For fun, I used Star Wars cupcake papers from Party City.

While the cupcakes cooled, I rolled and baked the cookies.  As Jenn's blog shows, use the Star Wars jawa  cookie cutter from Williams-Sonoma, place the cookie on the baking sheet, then cut out the jawa's face.  I also dusted the cookies with a bit of cinnamon-sugar to give the robes some texture.




You'll need 24 cookies for the cupcakes.  My recipe makes several dozen, so I made the rest wookies and droids and we just ate those! (The dough was a good color for the wookies!) 

While the cookies were cooling, I made chocolate icing for the cupcake.  Jenn used a dark chocolate peanut better icing, but I wanted plain chocolate.   I used a pre-made dark chocolate icing for D*C, which looked great, but tasted lousy.  For these, I used my favorite homemade chocolate icing recipe, one from Alton Brown (Good Eats) - recipe is in the side linked page.   This icing is spectacularly yummy, but very light colored.  I was okay with that for these.  If you wanted darker icing, either use a dark chocolate recipe or else add brown coloring.

Accent the Jawa with 2 orange nonpareil or sugar eyes. Tip: use tweezers to place the eyes close together.  UUTINI!!!! 

Saturday, December 17, 2011

Peace on Endor - Medium

I made this cake for my Star Wars friends for our annual Life Day Party:  Peace on Endor!  Good Will to All Beings!


I made the fondant figures in advance:  Jawas untangling a box of Christmas lights, a Wookie and Ewok family decorating a tree with imperial helmets...


The wookie looked like he might have been in the eggnog.  (Plus he was a little tipsy on the cake!)
Secure the standing figures to the cake with skewers or toothpicks.  (The baby ewok is just sitting on the cake, with her candy cane, as is the kneeling jawa.  The standing jawa is built on a part of a sugar cone, so very stable.  I used orange nonpareils for the eyes.)

I baked a 14" round cake plus the small paisley cake.  I used 3 box mixes across the 2 pans.  Let cool and cover with white buttercream.

To make the tree, cover a plain sugar cone with green stars (using #16 Wilton tip and a tube of green icing) - pull the stars a bit as you release, to make "branches."  Decorate with small lights from a craft store, candies, and helmets.  Affix Lego helmets with a bit of green icing.  

On the top layer, we had Darth "I find your lack of Festivus disturbing" Vader with a Festivus pole. 


Just because.  Happy Holidays!  (And may the Force be with you, throughout the year!)

Saturday, November 19, 2011

Petranaki Arena - Medium/Difficult

Oldest son wanted this classic scene from Episode 2 for his birthday, but he doesn't like cake so much so he asked me to use snickerdoodle cookies.  The arena walls are all cookies, the rest is fondant and inedible decorations.



This treat requires some prep.  I started with a very large plastic plant saucer from Home Depot, then got 4 sheets of craft foam from from Michael's.  Greg was nice enough to cut a big hole in the foam so the saucer could fit inside.  (So the foam was like a collar around the top of the saucer.)  He then covered all the Styrofoam with brown duck tape.

The Styrofoam gave me added height for the arena walls, to help with scale.  It also gave me a perfect way to anchor skewers to hold the cookies up.

I also got a pine dowel at Home Depot, stained it Sedona Red, and cut it to 8" lengths for the posts. Using a glue gun, secure these to the saucer.

Make the figures and beasts in advance from fondant.  I made Padme crouching, to position her on top of her post.  Anakin and Obi Wan were flat, for positioning against their posts.  For all, I made the bodies and heads, but left them bald (piped on hair at the end).  Make little handcuffs from dark grey fondant.


The Geonosian was suspended on a clear skewer obtained from the florist dept at Publix,   Roll the wings very, very thin.  I made the legs and arms separately, then attached with 1/2 toothpick.


The reek was the easiest - make him out of dark grey fondant, with a very thin stip of red on the back.  Add horns.  I did the brown bumps later with icing.  I did use the end of a skewer to make indentations on the back, then I piped brown icing into the indentations to get the desired effect.



The nexu was made from brown fondant.  I also made the spines for the back from dark grey fondant. When assembling, I piped tan icing on top with a #16 Wilton tip.  I used a #2 black tip to add some of the brindling (see a pcutres), as well as the claws, and I inserted the spines on the back into the icing. No. 2 tip white teeth.

The acklay requires some experimentation.  I made the body out of blue fondant, which set up on a glass (on its side) to give it the rearing-up shape.  I went over the back and head with some water and diluted green food coloring when he was set.  I also make the legs.  Note that he has 3 vestigial toes.  My plan was to support him with a clear skewer, but I could not do that on the plastic saucer, so  I ended up attaching the legs to a bit of white fondant that I wedged under the body to make it stand properly.  You could see the white wedge, but it was not a problem.


I traced the saucer curve shape onto parchment paper and cut it out. I made 4 batches of snickerdoodle cookies, using a rolled sugar cookie recipe.  Chill the dough, roll a long strip, the use a pizza cutter to cut the bottom edge of the cookies to follow the curve of the saucer.  Cut the strips in approx. 3 " lengths, and using a large round Wilton tip (such as 172) cut a hole in each cookie approx 1/2 inch from the end.  You will thread cookies onto skewers with the hole, so try to get cookies that are the same width with the hole in approx. the same place!   Before baking, sprinkle sugars with cinnamon-sugar.   Width of the cookies doesn't matter as much - I make some wider for the bottom rows, then some narrow for the top.  But do keep the width the same, so you don't get gaps between the rows.

To assemble, fit a row of cookies around the saucer, covering 2/3rd of so of the circumference. Stick a long skewer through each hole, securing it well in the Styrofoam.  Fitting cookies in like a puzzle, build the arena walls.  You'll want a lot of the height behind the posts.  This took around 160-175 cookies.

The spires are fondant covered Styrofoam cones, just for effect.  I also used some fondant for the "doorway" on the side of the saucer.

Tuesday, November 1, 2011

Star Wars Halloween

Greg carved the Death Star - Very difficult (took hours & hours!)  I did the rest - Vadar was difficult, but the rest were pretty easy.   Happy Halloween!


 


 This one's a jawa.

And the obligatory picture of the kids in their costumes!