I started by rounding up all of the Hasbro characters that I could find - the boys had some, I found some on eBay, and borrowed the rest. Some of the Hallmark Christmas ornaments also work - I have the Celebration set with Obi-Wan, Ponda Baba, and Baba's severed arm... (how perfect is that!)I found good floor plan diagrams of the cantina online, and removed most of the interior walls. I did have "niches" for the band, and (of course) Han and Greedo. Keeping the curved wall with the dome was also important. I planned where I would put the figures I had, based on the scene from the movie.
.JPG)
I laid out the floor plan 2 days before the party. I started with a 33"x33" cake board. We covered it with a piece of tan plastic tablecloth, then created a foundation for the walls using a 2" strip of stryofoam covered with tan masking tape. (This added height and also provided a place for skewers to stabilize the walls.) I knew I needed approx. 7" for the band, so I scaled the rest from there. The entire structure is approx. 32"x32", with the bar set 11" in from each side. (the center of the bar is in the middle of the back part of the structure. The bar is approx 14" long. The bar top is 2" deep, with 2" between the bar top and the center island. The island is also 2" in deep. This scale worked well with the figures.
The day before the party, I made rice crispy treats for the walls. At some point I lost count, but I think I made 9 pans (9x13) - yes 9 - of rice crispy treats. One batch made the dome. (Molded that in half of the ever-so-useful Wilton sports ball pan!) The rest were simply cut into 2" strips and piled on the foundation. My target wall height was 6", with the dome on top. The rice crispy strips curved very easily to make the rounded wall. Be sure to spray the pans liberally with non-stick spray! For planning, I started around 3 pm and finished around 7:30 or so.
Notice the "gap" in the wall - that's where a snickerdoodle wall gets inserted.
When I was done with the rice crispy treats, I made the dough for the snickerdoodles. I made a double-batch of dough (see recipes side link) - this was more than I needed, but I wanted to freeze some dough for Christmas baking next month. I "rolled" the dough into square-shaped logs that we 2" thick, so that I could slice-and-bake the bar structure the next morning.
The morning of the party, I got up early and baked cookies. I sliced cookies to stack as the bar and for the final bit of wall (the wall behind the bar). Before I baked the cookies, I used a Wilton large round tip (#12) to cut a hole in the center of each cookie. This enabled me to stack them on bamboo skewers which I stuck in the foam. It turned out that I didn't need skewers for bar itself, as it was only 3 cookies tall, but I did use skewers for the exterior wall. Bake some cookies without holes for the top. I rolled some additional dough out for the walls, table tops and bar tops.
Once it was all together, I added the Hasbro figures. I finished up by using some fondant to make the vessels on the bar island and the cups for the figures. (For the cups, just shape a small tube, then use a skewer to make the hole.)
Before we served this, we dropped a little MP3 player and tiny speaker in the area under the dome, playing the Cantina band music clip! I also added a tiny cup with a bit of dry ice and hot water behind the bar to give a smoky effect. Very fun!
Here are some shots of the interior:
To serve, just cut apart the walls! Enjoy!
